Polarization DuplEX
Wideband polarizition DuplEx at the frequency band 5 GHz
Printable spare parts
You can print spare parts suitable for 3D printing yourself
Snow and frost protection for 60 GHz
New models for UBNT AF60 LR or for AF60 and GBE-LR
Casing JH-LHG
Casing for radio unit RBLHG
Variability and accessories
Stainless steel, precision holder or metal box
3D print
You can print spare parts suitable for 3D printing yourself :
Securing screw
Practical securing of screws against falling out during radom mounting.
Recommended print settings:
layer height: 0.2 mm
first layer height: 0.25 mm
Ready for:
JH-LHG, JH-AF60, JH-AF60 LR, JH-AF60 Uni
Cable cap
Cable cap for JH-LHG
Recommended print settings:
layer height: 0.2 mm
coolig fan on (Prusa printer aprox. 30%)
Recomended material: PET-G or ASA, PMMA
Ready for:
JH-LHG
Spacer for JH-AF60 LR
The spacer provides free space around the heatsink of AF60 LR.
Recommended print settings:
layer height: 0.2 mm
coolig fan on (Prusa printer aprox. 40%)
Recomended material: PET-G, ASA
Ready for:
JH-AF60 LR, JH-AF60 Uni
Spacer for JH-AF60 Uni
The spacer provides the distance between radio and the radome.
The spacer allows the JH-AF60 LR to be mounted on AF60 a GBE-LR.
Attach the spacer to the radio using double-side adhesive tape - more in manual for JH-AF60 Uni.
Recommended print settings:
layer height: 0.2 - 0.3 mm
Recomended material: PET-G, ASA
Ready for:
JH-AF60 LR, JH-AF60 Uni
Mounting insert for JH-AF60
Recommended print settings:
layer height: 0.2 mm
coolig fan on (Prusa printer aprox. 30%)
Recomended material: PET-G or ASA
Ready for:
JH-AF60, JH-AF60 LR, JH-AF60 Uni
